LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Seat System) >> Repair Instructions >> Lumbar Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outer seat cushion trim panel. Refer to Trim Panel Replacement - Front Seat .
  2. Use a small, flat-bladed tool to remove the lumbar control switch from the trim panel retainer.
    3. Fig 1: Lumbar Control Switch & Trim Panel Retainer
    GM1230634Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the lumbar switch.
  4. Remove the switch from the seat.
scientia non olet · About LEMON Manuals