LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the left and right stabilizer shaft link nuts from the stabilizer shaft links (1).
    4. Fig 1: View Of Stabilizer Shaft Link
    GM614968Courtesy of GENERAL MOTORS CORP.
  4. Remove the insulator brackets (3) and the bolts from the stabilizer shaft (1).
  5. Remove the stabilizer shaft (1) from the rear suspension support.
    6. Fig 2: Stabilizer Shaft, Insulator, & Insulator Bracket
    GM156946Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals