LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the bolt from the stabilizer shaft insulator bracket (3).
  3. Remove the stabilizer shaft insulator bracket.
  4. Remove the stabilizer shaft insulator (2) from the stabilizer shaft.
    5. Fig 1: Stabilizer Shaft, Insulator, & Insulator Bracket
    GM156946Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals