Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Install the stabilizer shaft insulator (2) to the stabilizer shaft.
Install the stabilizer shaft insulator bracket (3).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the stabilizer shaft bracket nuts.
Tighten: Tighten the bolts to 48 N.m (35 lb ft).
Lower the vehicle.

Fig 1: Stabilizer Shaft, Insulator, & Insulator Bracket

Courtesy of GENERAL MOTORS CORP.