LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).
    2. Fig 1: Installing Stabilizer Shaft Insulators
    GM174594Courtesy of GENERAL MOTORS CORP.
  2. Install the left and right side stabilizer shaft insulator brackets.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the left and right side stabilizer shaft insulator bracket bolts.

    Tighten:  Tighten the stabilizer shaft insulator bracket bolts to 52 N.m (38 lb ft).

    4. Fig 2: View Of Insulator Brackets
    GM357447Courtesy of GENERAL MOTORS CORP.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals