LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Wiper System & Washer System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seal to the washer solvent container.
  2. Install the washer pump to the washer solvent container.
  3. Connect the washer pump electrical connector.
  4. Connect the washer pump hose.
    5. Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor
    GM815208Courtesy of GENERAL MOTORS CORP.
  5. Install the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  6. Fill the washer solvent container with washer solvent.
  7. Close the hood.
scientia non olet · About LEMON Manuals