LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Body Front End) >> Repair Instructions >> Hood Adjustment >> Notes

Hood Adjustment: Notes

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

The hood hinges are bolted to the fender and the hood. Fore-aft adjustment may be made by elongating the hood-side hinge holes. Vertical adjustment at the front may be made by adjusting the hood bumpers up or down. Gap tolerances are 2-6 mm (0.08-0.22 in) and flush tolerances are 0-2 mm (0-0.08 in).

scientia non olet · About LEMON Manuals