Disabling Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition switch.
- Remove the fuse block access cover.
- Remove the SIR Fuse.
- Remove the connector position assurance (CPA) from the side impact module - LF connector (1) located under the driver seat.
- Disconnect the side impact module - LF connector (1).
IMPORTANT:
With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.