Enabling Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the key from the ignition.
- Connect the sensor harness connector (3) to the sensor (1).
- Install the orange CPA (2) into the yellow sensor harness connector (3).
- Install the radiator upper air baffle and deflector.
- Install the SIR Fuse.
- Install the IP fuse block cover.
- Staying well away from all inflator modules, turn ON the ignition.
- The AIR BAG indicator will flash seven times.
- The AIR BAG indicator will then turn OFF.
- Perform Diagnostic System Check - SIR if the AIR BAG indicator does not operate as described.