LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Steering Column Filler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) fuse block access hole cover.
  2. Disengage the left I/P insulator retainers from the lower I/P trim pad.
  3. Remove the steering column filler panel bolts.
  4. Pull the steering column filler panel rearward to disengage the retainers. Lower the filler panel away from the I/P lower trim panel.
  5. Disconnect the electrical connector from the rear compartment release switch.
  6. Remove the rear compartment release switch.
  7. Remove the steering column filler panel.
    8. Fig 1: Removing Steering Column Filler Panel
    GM519517Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals