Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Install the insulator to the stud at the accelerator pedal.

Fig 1: Installing Insulator To Accelerator Pedal

Courtesy of GENERAL MOTORS CORP.

Insert the courtesy lamp socket to the insulator opening. Rotate the socket clockwise.
Install the insulator retainers to the lower I/P trim pad openings.

Fig 2: Installing Insulator Retainers

Courtesy of GENERAL MOTORS CORP.