LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Window Switch Replacement (Impala) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front door power window control switch to the front door pull cup pressing into place until fully seated.
  2. Connect the electrical connector to the power window control switch.
  3. Fig 1: Locating Power Window & Power Mirror Control Switches (Impala)
    GM771656Courtesy of GENERAL MOTORS CORP.
  4. Install the front door pull cup and screws (1) to the front door trim panel. Refer to Armrest Pull Cup Replacement (Impala)  or Armrest Pull Cup Replacement (Monte Carlo) .
  5. Fig 2: Front Door Pull Cup & Screws (Impala)
    GM800912Courtesy of GENERAL MOTORS CORP.