LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 184 (Battery, Charging System & Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery tray.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the battery tray bolts.

    Tighten:  Tighten the bolts to 5 N.m (44 lb in).

  4. Fig 1: Installing Battery Tray
    GM461887Courtesy of GENERAL MOTORS CORP.
  5. Install the battery. Refer to Battery Replacement .
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .