LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Data Link Communication System) >> Description and Operation >> Data Link Communications Description and Operation >> Data Link Connector (DLC)

Data Link Connector (DLC)

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

The DLC is a standardized 16 way connector located below the instrument panel and close to the steering column. Both the connector design and location are dictated by industry wide agreement to follow SAE J1962 standards.

All DLCs are required to provide a power supply, hot at all times, to Pin 16. This circuit is used to power the scan tool. All DLCs provide a power ground at Pin 4 and a clean signal ground at Pin 5.

The class 2 serial data communications circuit is provided at Pin 2 of the DLC.