LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Front Suspension System) >> Repair Instructions >> Upper Ball Joint Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Upper Ball Joint
    GM744332Courtesy of GENERAL MOTORS CORP.
  1. Install the upper ball joint to steering knuckle using J 9519-E  , J 21474-01  , and J 45117  . See Special Tools and Equipment .
    2. Fig 2: Removing/Installing Upper Ball Joint Retaining Clip
    GM744335Courtesy of GENERAL MOTORS CORP.
  2. Install the upper ball joint retaining clip.
  3. Install the steering knuckle with wheel hub attached. Refer to Steering Knuckle Replacement (RWD)  or Steering Knuckle Replacement (4WD) .
  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
  6. Check the front wheel alignment. Refer to Wheel Alignment Specifications in Wheel Alignment.
scientia non olet · About LEMON Manuals