LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the stabilizer shaft links to the stabilizer shaft retaining nuts. Refer to Stabilizer Shaft Link Replacement .
    3. Fig 1: View Of Stabilizer Shaft, Insulator, Insulator Clamp & Mounting Bolts
    GM1257519Courtesy of GENERAL MOTORS CORP.
  3. Remove the stabilizer shaft insulator clamp mounting bolts.
  4. Remove the stabilizer shaft insulator clamp from the stabilizer shaft insulator.
  5. Remove the stabilizer shaft insulators from the stabilizer shaft.
    IMPORTANT: Note the position of the bend in the stabilizer shaft.
  6. Remove the stabilizer shaft from the vehicle.
scientia non olet · About LEMON Manuals