LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer shaft insulator to stabilizer shaft with slit facing the front of the vehicle.
  2. Install the stabilizer shaft insulator clamp to the stabilizer shaft insulator.
    Fig 1: View Of Stabilizer Shaft, Insulator, Insulator Clamp & Mounting Bolts
    GM1257519Courtesy of GENERAL MOTORS CORP.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the stabilizer shaft insulator clamp mounting bolts.

    Tighten:  Tighten the stabilizer shaft insulator clamp mounting bolts to 55 N.m (41 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals