LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Body Rear End) >> Repair Instructions >> Window Replacement - Midgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the window into the midgate.
  2. Remove the midgate inner panel. Refer to Midgate Panel Replacement - Inner .
    3. Fig 1: Supporting Midgate With Pins
    GM1236621Courtesy of GENERAL MOTORS CORP.
  3. Release the midgate latches, opening the midgate until the holes in the hinge assembly are aligned.
  4. Install 5 mm (0.196 in) pins (2) or an allen wrench through the holes in each hinge (1) to support the midgate.
  5. Remove the midgate window outer sealing strip. Refer to Sealing Strip Replacement - Midgate Window Outer .
    6. Fig 2: Removing Midgate Window
    GM986481Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts retaining the midgate window to the window regulator.
  7. Remove the midgate window out through the top of the midgate assembly.
scientia non olet · About LEMON Manuals