Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Position the carpet to the floor panel.
- Feed the front edge of the carpet underneath the instrument panel.
- Align the holes in the carpet to the seat studs on the floor panel.
- Position the rear carpet over the edge of the front carpet.
- Install the floor console bracket. Refer to Bracket Replacement - Console Floor in Instrument Panel, Gages and Console.
- Install the floor console Refer to Console Replacement in Instrument Panel, Gages and Console.
- Install the center pillar trim panels. Refer to Garnish Molding Replacement - Center Pillar .
- Install the front door sill plates. Refer to Door Sill Plate Replacement - Front .
- Install the front bucket seats. Refer to Seat Replacement - Front Bucket in Seats.
CAUTION:
In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.