Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Weather-Strip Retainers

Courtesy of GENERAL MOTORS CORP.

Open the front door.
Remove the push-pin retainers (2) from the front door sealing auxiliary weatherstrip located at the base of the pillar.

Fig 2: View Of Front Door Sealing Weatherstrip

Courtesy of GENERAL MOTORS CORP.

Pull back the front door sealing weatherstrip (1) in order to expose the windshield side reveal molding screws (2).

Fig 3: Identifying Windshield Reveal Molding Screws

Courtesy of GENERAL MOTORS CORP.

Remove the screws from the windshield side reveal molding.
Remove the reveal molding from the windshield pillar.