LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Accessory Power Socket >> Repair Instructions >> Accessory Power Receptacle Replacement - 12 Volt >> Removal Procedure

Removal Procedure

  1. Remove the 12-volt power supply fuse.
  2. Remove the 12-volt power supply receptacle by placing one side of the "T" portion of J 42059  into the tab window. Angle the other side into the opposite tab window. Pull the 12-volt power supply receptacle straight out.
    3. Fig 1: Inserting J 42059 Into 12-Volt Power Supply Receptacle
    GM706160Courtesy of GENERAL MOTORS CORP.
  3. Remove J 42059  from the power supply receptacle.
  4. Disconnect the electrical connector from the power supply receptacle.
    Fig 2: Locating 12-Volt Power Supply Receptacle Electrical Connector
    GM706165Courtesy of GENERAL MOTORS CORP.
  5. Using your index finger, pull out the power supply retainer.
    Fig 3: Locating Power Supply Retainer
    GM706167Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals