Installation Procedure

Install the XM digital radio receiver to the receiver bracket.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the radio receiver nuts.
Tighten: Tighten the nuts to 4 N.m (35 lb in).

Fig 1: View Of Radio Wiring Harness
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connector and the antenna connectors to the XM radio receiver.

Fig 2: Identifying XM Digital Radio Receiver
Courtesy of GENERAL MOTORS CORP.
Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
Perform the setup procedure for the digital radio receiver. Refer to Digital Radio Receiver Setup .