Removal Procedure

Move the screen to the open position.
Open the rear screw cover using a flat-bladed tool.

Fig 1: Identifying Rear Screw Cover
Courtesy of GENERAL MOTORS CORP.
Remove the 4 retaining bolts.

Fig 2: Locating 4 Retaining Bolts
Courtesy of GENERAL MOTORS CORP.
With one hand holding the DVD player assembly, pull down the retainer from the bracket.
Allow the DVD player assembly to come to rest on the hook.

Fig 3: View Of DVD Player Assembly
Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Observe the routing of the wiring harness (2).
Disconnect the wire connector (1).

Fig 4: Identifying DVD Player Wiring Harness & Connector
Courtesy of GENERAL MOTORS CORP.
Slightly lift up the DVD player assembly so that the hook can be removed from its resting position.
Remove the DVD player from the vehicle.