Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.

Attach the antenna base to the roof and fasten the antenna nut.
Tighten: Tighten the nut to 2 N.m (18 lb in).

Fig 1: Identifying Retaining Nut Of Antenna Assembly
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connector to the antenna.

Fig 2: Identifying Retaining Nut Of Antenna Assembly
Courtesy of GENERAL MOTORS CORP.
Push the headliner back into place. Refer to Trim Panel Replacement - Side Front Door (Aztek) or Trim Panel Replacement - Side Front Door (Rendezvous) in Interior Trim.
Attach the sunshade to the headliner. Refer to Sunshade Replacement in Interior Trim.
Attach the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.