Data Link References
This table identifies which serial data link that a particular module uses for in-vehicle data transmission. Some modules may use more than one data link to communicate. Some modules may have multiple communication circuits passing through them without actively communicating on that data link. This table is used to assist in correcting a communication malfunction. For the description and operation of these serial data communication circuits, refer to Data Link Communications Description and Operation .
Data Link References
| Control Module | Data Link Type | Diagnostic Procedure |
|---|---|---|
| Schematic Reference: Data Link Connector (DLC) Schematics | ||
| BCM | Class 2 | Refer to Scan Tool Does Not Communicate with Class 2 Device |
| EBCM | Class 2 | Refer to Scan Tool Does Not Communicate with Class 2 Device |
| Engine Control Module (ECM) | High Speed GMLAN/Class 2 | |
| HUD | Class 2 | Refer to Scan Tool Does Not Communicate with Class 2 Device |
| Instrument Panel Cluster (IPC) | Class 2 | Refer to Scan Tool Does Not Communicate with Class 2 Device |
| PASS-KEY Module | Class 2 | Refer to Scan Tool Does Not Communicate with Class 2 Device |
| PCM | Class 2 | Refer to Scan Tool Does Not Communicate with Class 2 Device |
| Radio | Class 2 | Refer to Scan Tool Does Not Communicate with Class 2 Device |
| SDM | Class 2 | Refer to Scan Tool Does Not Communicate with Class 2 Device |
| Transmission Control Module (TCM) | High Speed GMLAN | Refer to Scan Tool Does Not Communicate with High Speed GMLAN Device |