Power Windows Inoperative - Express Down Function
Power Windows Inoperative - Express Down Function
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Power Window Schematics Connector End View Reference: Power Door Systems Connector End Views |
|||
| 1 | Did you perform the Door Systems Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Door Systems |
| 2 | Verify that the power windows express down function fault is present. Does the power windows express down function operate normally? |
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
| 3 | Inspect for a poor connections at the harness connector of the driver window switch. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 5 | Go to Step 4 |
| 4 | Replace the driver window switch. Refer to Power Window Switch Replacement - Left Front (Aztek) or Power Window Switch Replacement - Left Front (Rendezvous) . Is the repair complete? |
Go to Step 5 | - |
| 5 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |