LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Motor Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the wiper arms. Refer to Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  3. Remove the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement in Wiring Systems.
  4. Remove the cruise control module. Refer to Cruise Control Module Replacement in Cruise Control.
  5. Disconnect the wiper motor cover electrical connector.
  6. Remove the wiper system drive module bolts.
    Fig 1: View Of Wiper Motor Module
    GM697659Courtesy of GENERAL MOTORS CORP.
  7. Remove the wiper system drive module from the engine compartment.