LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission Clutches >> Repair Instructions >> Clutch Start Switch Replacement >> Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE .
  1. Install the clutch start switch and retaining nut.

    Tighten 

    Tighten the retaining nut to 16 N.m (12 lb ft).

  2. Connect the clutch start switch electrical connector.
  3. Check the clutch start switch for proper operation.
scientia non olet · About LEMON Manuals