LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Mu5 >> Automatic Transmission Oil Cooler >> Automatic Transmission Mount Replacement Front >> Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE .
  1. Install the front transaxle bracket and bolts.

    Tighten 

    Tighten the transaxle bracket bolts to 64 N.m (47 Ib. ft).

  2. Install the insulator to the mount bracket.
  3. Install the front transaxle mount through bolt.

    Tighten 

    Tighten the transaxle mount through bolt to 52 N.m (38 Ib. ft).

  4. Install the 2 bolts to the front transaxle mount.

    Tighten 

    Tighten the front transaxle mount bolts to 39 N.m (29 Ib. ft).

  5. Install the left hand and right hand splash shields.
  6. Lower the vehicle.
  7. Remove the engine support fixture.
scientia non olet · About LEMON Manuals