LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation >> Ignition Systems >> Ignition Coil >> Removal

Ignition Coil: Removal

  1. Remove 4 bolts from the engine cover (1). See Figure .
  2. Remove engine cover (1).
  3. Disconnect all ignition coil (2) harness connectors. See Fig 1 .
  4. Remove mounting bolts (4) from the ignition coils. See Fig 1 .
  5. Remove the bolts (2) securing the wiring harness (1).
  6. Remove the wiring harness (1).
  7. Remove the ignition coils (3).
Fig 1: Removing/Installing Ignition Coils
G00180655Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals