LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation >> Emission Systems & Sub-Systems >> EVAP Canister >> Removal

EVAP Canister: Removal

  1. Raise and support vehicle.
  2. Disconnect On-Board Refueling Vapor Recovery (ORVR) vent line (1) from EVAP canister port by pinching both sides of the hose connector (1). See Fig 1 .
  3. Disconnect EVAP vapor line (1) from EVAP canister port by pinching both sides of hose connector (1). See Fig 2 .
  4. Disconnect 3 EVAP hoses (3) from EVAP canister (1). See Fig 3 .
  5. Disconnect EVAP pressure switching solenoid harness connector.
  6. Remove 3 bolts (2) and EVAP canister (1).
  7. Inspect EVAP purge system for carbon particle contamination before replacing EVAP canister.
Fig 1: Removing/Installing ORVR Vent Line
G00180652Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing EVAP Vapor Line
G00180653Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing/Installing EVAP Canister
G00180654Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals