Conditions For Running DTC

DTCs P0106, P0107, P0108, P0112, P0113, P0117, P0118, P0122, P0123, P0125, P0128, P0201-P0204, P0220, P0300-P0304, P0315, P0336, P0442, P0446, P0452, P0453, P0455, P0496, P0506, P0507, P0601, P0602 or P1621 are not set.
The ECT sensor parameter is more than 158°F (70°C).
The engine speed is 1000-3500 RPM.
The Ignition 1 signal parameter is more than 11 volts.
The Engine Run Time parameter is more than 200 seconds.
The engine is operating in closed loop.
The TP angle is 6-40 percent.
The EVAP control system is commanded open for more than 35 percent.
The MAP sensor parameter is between 10-104 kPa.
The purge learned memory is more than approximately 0.78.
The Fuel Level sensor parameter is more than 10 percent.
The Air Flow Calculated parameter is more than 15 g/s.
The above conditions are met for 60 seconds.