Installation Procedure
- Install a replacement stud in the wheel hub.
- Add enough washers (3) in order to draw the stud into the hub (2).
- Install the wheel nut (1) with the flat side against the washers (3).
Important: Fully seat the wheel stud against the hub flange (2).
- Tighten the wheel nut (1) until the wheel stud is fully seated against the hub flange.
- Back off the wheel nut (1) and remove the washers (3).
- Install the brake rotor. Refer to FRONT BRAKE ROTOR .
- Install the brake caliper and bracket. Refer to FRONT BRAKE CALIPER
- Install the tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
- Lower the vehicle.