Conditions For Running Test (Cold Start)
WARNING: This page is about a different variant/trim than selected.
Ensure vehicle meets the following conditions before performing procedure:
- Barometric pressure is greater than 65 kPa.
- The ECT sensor parameter is less than 86°F (30°C).
- The IAT sensor parameter is less than 90°F (32°C).
- The difference between IAT and ECT is 7°F or less.
- Battery voltage is 10-18 volts.
- Fuel level is 1/4-3/4.
Test will initiate only after a cold start. A cold start is considered when engine coolant temperature is less than 35°F (2°C).