LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Grand Prix GTP >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Wheel Speed Sensor Replacement - Front >> Installation Procedure

Installation Procedure

  1. Install the hub and bearing assembly (2) to the vehicle. Refer to WHEEL BEARING/HUB REPLACEMENT - FRONT .
    Fig 1: Installing Hub & Bearing Assembly
    G01490677Courtesy of GENERAL MOTORS CORP.
  2. Install the front wheel speed sensor jumper harness electrical connector (1).
  3. Install the wheel and tire assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  4. Lower the vehicle.
  5. Turn the ignition switch to the ON position with the engine off.
  6. Perform the Diagnostic System Check - ABS  .
    Fig 2: Installing Front Wheel Speed Sensor Jumper Harness Electrical Connector
    G01490678Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals