Removal Procedure
- Remove the front door trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE FRONT DOOR
.
- Remove the front door water deflector. Refer to WATER DEFLECTOR REPLACEMENT - FRONT DOOR
.
- Raise the front door window far enough in order to gain access through the inner door panel to the window to regulator bolts (2).
- Remove the bolts from front door window to regulator.
- Raise the front door window to the full up position.
- Tape the front door window in the full up position.
- Disconnect the electrical connector.
Courtesy of GENERAL MOTORS CORP.
- Remove the bolts from the front door window regulator and motor.
- Remove the front door window regulator from the front door.
Courtesy of GENERAL MOTORS CORP.