LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Grand Am SE, 2.2 F, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Servicing) >> Removal & Installation >> Low-Reverse Servo Assembly >> Removal

Low-Reverse Servo Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle.
  2. Remove the oil pan and filter. See DRAINING & REFILLING  under LUBRICATION.
  3. Remove the oil feed pipes. See OIL FEED PIPES  .
  4. Remove the 3 low and reverse band servo cover bolts, the servo and the spring. See Fig 1 .
  5. Disassemble, clean and inspect the low-reverse servo assembly.
Fig 1: Removing & Installing Low-Reverse Servo
G00088296Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals