LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Grand Am SE, 2.2 F, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Servicing) >> Removal & Installation >> Low-Reverse Servo Assembly >> Installation

Low-Reverse Servo Assembly: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Assemble the low-reverse servo.
  2. Install the low and the reverse band servo and cover. See Figure . Install and tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Install the oil feed pipe. See OIL FEED PIPES  .
  4. Install the oil filter and pan. See DRAINING & REFILLING  under LUBRICATION.
  5. Lower the vehicle.
  6. Connect the negative battery cable.
  7. Fill transaxle with appropriate fluid to proper level. See LUBRICATION  .
scientia non olet · About LEMON Manuals