LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Grand Am SE, 2.2 F, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Window Channel Replacement - Front Side Rear >> Installation Procedure

Installation Procedure

  1. Position the rear run channel (1) in the front door.
  2. Lift up the rear channel to install the top clip.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the window rear channel bolt (2).

    Tighten 

    Tighten the front door window rear run channel bolt 6 N.m (53 lb in).

  4. Install the reveal molding.
  5. Install the front door window. Refer to WINDOW REPLACEMENT - FRONT DOOR  .
  6. Install the front door water deflector. Refer to WATER DEFLECTOR REPLACEMENT - FRONT DOOR  .
  7. Install the front door trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE FRONT DOOR (OLDSMOBILE)  or TRIM PANEL REPLACEMENT - SIDE FRONT DOOR (PONTIAC)  .
    Fig 1: Installing Window Rear Run Channel & Bolt To Front Door
    G01510926Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals