LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Grand Am GT1 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Computerized Engine Controls >> Powertrain Control Module >> Removal (2.2L)

Removal (2.2L)

  1. Powertrain Control Module (PCM) is located behind left front kick panel. See Fig 1 . Turn ignition switch to OFF position. Disconnect negative battery cable.
  2. Remove the left closeout/insulator (kick) panel.
  3. Push down on the locking tab, and pull up on the release lever to disconnect PCM harness connectors.
  4. Depress the PCM locking tab. See Fig 2 .
  5. Slide the PCM up and out from the PCM bracket.
Fig 1: Locating PCM Assembly (2.2L)
G00121080Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing PCM (2.2L)
G00112746Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals