LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Grand Am GT1 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Repair Instructions >> Transmitter Battery Replacement >> Installation Procedure

Installation Procedure

  1. Use a 3-volt CR2016 battery or the equivalent. Install the battery (2) with the positive side up.
  2. Close the transmitter case (6,4).
  3. Ensure that the seal is in position. Align the 2 halves of the case (6,4) and snap the halves together.
  4. Verify the operation of the transmitter.
  5. Synchronize the transmitter if necessary. Refer to TRANSMITTER SYNCHRONIZATION  .
    Fig 1: Installing Battery & Closing Transmitter Case
    G01510393Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals