Installation Procedure

Insert the tab on the module to the opening.

Fig 1: Inserting Tab On Module To Opening
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the radio antenna module bolt.
Tighten

Tighten the bolt to 6 N.m (53 lb in).

Fig 2: Installing Radio Antenna Module Bolt
Courtesy of GENERAL MOTORS CORP.
Attach the radio antenna cable.
Attach the body wiring harness connector.
Attach the rear window defog connectors to the glass.
Install the right rear quarter upper trim panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER UPPER (COUPE) or TRIM PANEL REPLACEMENT - REAR QUARTER UPPER (SEDAN) in Interior Trim.

Fig 3: Installing Body Wiring Harness Connector & Radio Antenna Cable
Courtesy of GENERAL MOTORS CORP.