LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Grand Am GT1 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Turn the ignition switch to the OFF position.
  2. Remove the right insulator panels. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT (OUTBOARD) or CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT (INBOARD) in Instrument panel, Gages, and Console.
  3. Slide the body control module (BCM) from the bracket.
  4. Disconnect the BCM connectors from the BCM.
  5. Remove the BCM (2).
Fig 1: Removing BCM
G01510180Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals