LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Diagnosis, Service & Repair - 4T65-E >> Repair Instructions >> Torque Converter Cover Replacement >> Installation Procedure

Installation Procedure

  1. Install the torque converter cover.
  2. Install the torque converter cover bolts.

    Tighten 

    Tighten the bolts to 10 N.m (89 lb in).

  3. Lower the vehicle.
    Fig 1: Installing Torque Converter Cover Bolts
    G01502058Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals