LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Diagnosis, Service & Repair - 4T65-E >> Repair Instructions >> Input Speed Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the input speed sensor (440) into the case cover.
  2. Install the input speed sensor clip (441) into the case cover.
  3. Connect the transaxle wiring harness.
  4. Install the case side cover. Refer to CASE SIDE COVER REPLACEMENT  .
    Fig 1: Installing Input Speed Sensor
    G01501996Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals