LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 721 (Wiper System And Washer System) >> Repair Instructions >> Wiper Blade Element Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to contact the metal spline of the wiper blade element.
  1. Insert the open end of the wiper blade element (3) into the bottom claws of the wiper blade (2).
  2. Guide the wiper blade element (3) through the wiper blade (1) claw sets.
  3. Engage the bottom claw (2) of the wiper blade (1) into the notches in wiper blade element (3).
    Fig 1: Identifying Wiper Blade Elements
    G01587209Courtesy of GENERAL MOTORS CORP.
  4. Install the wiper blade onto the wiper arm. Refer to WIPER ARM BLADE REPLACEMENT  .
scientia non olet · About LEMON Manuals