LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 721 (Wiper System And Washer System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seal to the washer solvent container, pressing in until fully seated.
  2. Position the washer pump to the washer solvent container pressing, in until fully seated.
  3. Connect the washer pump electrical connector.
    Fig 1: Connecting Washer Pump Electrical Connector
    G01587195Courtesy of GENERAL MOTORS CORP.
  4. Connect the washer pump hose.
  5. Install the front fender liner. Refer to FRONT FENDER LINER REPLACEMENT in Body Front End.
  6. Fill the washer solvent container with washer solvent.
scientia non olet · About LEMON Manuals