LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 718 (Engine Exhaust System) >> Repair Instructions >> Converter Hanger Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 3-way catalytic converter pipe hangers.
    Fig 1: Installing Catalytic Converter Pipe Hangers
    G01969227Courtesy of GENERAL MOTORS CORP.
  2. Remove the support from the exhaust system and the vehicle.
  3. Inspect the exhaust system for underbody contact.
  4. Lower the vehicle.