LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer link into the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the stabilizer shaft link bolt and nut.

    Tighten 

    Tighten the stabilizer shaft link nut to 23 N.m (17 lb ft).

    Fig 1: Installing Stabilizer Shaft Link Bolt & Nut
    G01569416Courtesy of GENERAL MOTORS CORP.
  3. Install the tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals