LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Wheel Alignment Specifications & Adjustment Procedures) >> Repair Instructions >> Front Camber Adjustment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle and provide suitable support. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the tire and wheel assemblies from the front and the rear axles. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  3. Remove the strut from the vehicle. Refer to STRUT, STRUT COMPONENT AND/OR SPRING REPLACEMENT .
  4. Place the strut in a vise and file the hole lateral - oblong. Compare the appearance of the holes before filing (2) with after filing (3).
  5. File the lower strut-to-knuckle attaching hole for a front camber adjustment.
    Fig 1: Filing Hole Lateral-Oblong
    G01673291Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals